Selecting The Mode Setting Of Each Item - Sony Handycam DCR-PC101E Operating Instructions Manual

Changing the menu settings
To return to FN
Press EXIT.
Menu items are displayed as the following
icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
PRINT SET
CM SET
TAPE SET
SETUP MENU
OTHERS
English

Selecting the mode setting of each item

Menu items differ depending on the position of the POWER switch.
The LCD screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
N.S. LIGHT
AUTO SHTR
Note on FLASH MODE and FLASH LVL
You can use FLASH MODE and FLASH LVL only when the external flash (optional) is set.
Note on FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level.
246
Mode Meaning
—— To suit your specific shooting requirement
(p. 79)
—— To add special effects like those in films or on the TV
to images (p. 74, 95)
z ON To fire the flash (optional) regardless of the
brightness of the surroundings
AUTO To fire the flash (optional) automatically
AUTO To fire the flash (optional) before recording to
reduce the red-eye phenomenon
HIGH To make the flash level higher than normal
z NORMAL To use the normal setting
LOW To make the flash level lower than normal
—— To adjust the white balance (p. 67)
z ON To use the NightShot Light function (p. 46)
OFF To cancel the NightShot Light function
z ON To automatically activate the electronic shutter when
shooting in bright conditions
OFF To not automatically activate the electronic shutter
even when shooting in bright conditions
z is the default setting.
POWER
switch
CAMERA
MEMORY
VCR
CAMERA
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA