A/V Connecting Cable - Sony Handycam DCR-PC101E Operating Instructions Manual

Dubbing only desired scenes
– Digital program editing (on tapes)
Note
When editing digital video, the operation signals
to the VCR cannot be sent with LANC
Step 1: Connecting to the VCR
You can connect either the A/V connecting cable
or the i.LINK cable.
When you use the A/V connecting cable, connect
the devices as illustrated in page 110. When you
use the i.LINK cable, connect the devices as
illustrated in page 111.
If you connect using an i.LINK cable
With digital-to-digital connection, video and
audio signals are transmitted in digital form for
high-quality editing.
Step 2: Setting the VCR to
operate with the

A/V connecting cable

To edit using the VCR, send the control signal by
infrared rays to the remote sensor on the VCR.
When you connect using the A/V connecting
cable, follow the procedures below, (1) to (4), to
send the control signal correctly.
114
.
1