Sony Handycam DCR-PC101E Operating Instructions Manual page 77

Using special effects
– Digital effect
(1) Set the POWER switch to CAMERA, then
press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired
digital effect mode appears.
(3) Press a desired digital effect mode. In STILL
and LUMI., the still image is stored in
memory.
(4) Press –/+ to adjust the effect.
Items to adjust
STILL The rate of the still image you
want to superimpose on the
moving picture
FLASH The interval of flash motion
LUMI. The colour scheme of the area in
the still image which is to be
swapped with a moving picture
TRAIL The vanishing time of the
incidental image
SLOW SHTR Shutter speed. The larger the
shutter speed number, the slower
the shutter speed.
OLD MOVIE No adjustment necessary
(5) Press OK to return to PAGE2.
1
FN
(1)
(2)
(3)
(4)
(5)
2~4
DIG
DIG EFFT
OFF
EFFT
SLOW
SHTR
STILL
The bar appears when setting following
digital effect modes: STILL, FLASH,
LUMI., TRAIL./
DIG EFFT
OK OFF
OLD
MOVIE
–
FLASH LUMI. TRAIL
OK
LUMI. +
77