Recording An Image From A Tape As A Still Image - Sony Handycam DCR-PC101E Operating Instructions Manual

Recording an image
from a tape as a still
image
Your camcorder can read moving picture data
recorded on a tape and record it as a still image
on a "Memory Stick."
Your camcorder can also take in moving picture
data through the input connector and record it as
a still image on a "Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press . The picture recorded on the tape
is played back.
(3) Keep pressing PHOTO lightly until the
picture from the tape freezes. CAPTURE
appears on the screen. Recording does not
start yet.
To change the still image, release PHOTO,
select a still image again, and then press and
hold PHOTO lightly.
(4) Press PHOTO deeper. Recording is complete
when the bar scroll indicator disappears. The
image displayed on the screen when you
pressed PHOTO deeper will be recorded on
the "Memory Stick."
2
168
(1)
(2)
(3)
(4)
3
4
SFN
1 / 12
640
CAPTURE
FN
SFN
640
FN