Step 3 Inserting A Cassette - Sony Handycam DCR-PC101E Operating Instructions Manual

Step 3 Inserting a
cassette
(1) Prepare the power source.
(2) Slide OPEN/ZEJECT in the direction of the
arrow and open the lid. The cassette
compartment automatically lifts up and
opens.
(3) Push the middle portion of the back of the
cassette to insert.
Insert the cassette in a straight line deeply into
the cassette compartment with the window
facing out.
(4) Close the cassette compartment by pressing
the mark on the cassette compartment.
The cassette compartment automatically goes
down.
(5) After the cassette compartment goes down
completely, close the lid until it clicks.
2
OPEN/ZEJECT
To eject a cassette
Follow the procedure above, and take out the
cassette in step 3.
Notes
•Do not press the cassette compartment down.
Doing so may cause malfunction.
•The cassette compartment may not be closed
when you press any part of the compartment
other than the mark.
When you use mini DV cassettes with cassette
memory
Read instructions about cassette memory to use
this function properly (p. 282).
To prevent accidental erasure
Slide the write-protect tab on the cassette to
expose the red mark.
(1)
(2)
Z
(3)
(4)
(5)
3,4 5
31