Playback-Basics - Sony DCR-TRV8 Operating Instructions Manual

Playback - Basics --
'laying back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can control playback using
the Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VTR while pressing the small green button. The
video control buttons light up.
(3) Slide OPEN. Then, open the LCD panel.
(4) Press "4"4to rewind the tape.
(5) Press I_ to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. The
speaker on your camcorder is silent when the LCD pane! is closed.
REW_
3 1
5
6
=
J
PLAY
-- VOLUME ÷
To stop playback
Press I.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
mmmm
"O
Cr
I
25