Sony Handycam DCR-PC101E Operating Instructions Manual page 35

Recording a picture
After recording
(1) Set the POWER switch to OFF (CHARGE).
(2) Close the LCD panel and set the Holding Grip
back to the previous position.
(3) Eject the cassette.
(4) Remove the battery pack.
Notes
•Fasten the grip strap firmly.
•Do not touch the built-in microphone during
recording.
•The recording data (date/time or various
settings when recorded) are not displayed
during recording. However, they are recorded
automatically onto the tape. To display the
recording data, press DATA CODE during
playback. You can also use the Remote
Commander for this operation (p. 54).
Note on Recording mode
Your camcorder records and plays back in the SP
(standard play) mode and in the LP (long play)
mode. Select SP or LP in the menu settings
(p. 251). In the LP mode, you can record
1.5 times as long as in the SP mode.
When you record a tape in the LP mode on your
camcorder, we recommend playing the tape on
your camcorder.
Note on the LOCK switch
When you slide the LOCK switch to the left, the
POWER switch can no longer be set to MEMORY
accidentally. The LOCK switch is set to the right
as a default setting.
To enable smooth transition
Transition between the last scene you recorded
and the next scene is smooth as long as you do
not eject the cassette even if you turn off your
camcorder.
However, check the following:
– Do not mix recordings in the SP mode and in
the LP mode on one tape.
– When you change the battery pack, set the
POWER switch to OFF (CHARGE).
– When you use a tape with cassette memory,
you can make the transition smooth even after
ejecting the cassette by using the END SEARCH
function (p. 50).
(1)
(2)
(3)
(4)
–
–
–
35