Connecting To Your Computer With Usb Port - For Macintosh Users - Sony Handycam DCR-PC101E Operating Instructions Manual

Connecting to your
computer with USB port
– For Macintosh users
When connecting to your computer
with the USB port
Before connecting your camcorder to your
computer, install the USB driver on your
computer. The USB driver is packaged together
with application software for viewing images on
the CD-ROM supplied with your camcorder.
Recommended Macintosh
environment
Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X
(v10.0/v10.1)
Standard installation is required.
However, note that the upgrade to Mac OS 9.0/
9.1 should be used for the following models:
•iMac with the Mac OS 8.6 standard installation
and a slot loading type CD-ROM drive
•iBook or Power Mac G4 with the Mac OS 8.6
standard installation
The USB port must be provided as standard.
QuickTime 3.0 or newer must be installed (to
play back moving pictures).
Notes
•Operations are not assured for the Macintosh
environment if you connect two or more USB
equipment to a single computer at the same
time, or when using a hub.
•Some equipment may not operate depending
on the type of USB equipment that is used
simultaneously.
•Operations are not assured for all the
recommended computer environments
mentioned above.
•Macintosh and Mac OS, QuickTime are
trademarks of Apple Computer Inc.
•All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, "™"
and " " are not mentioned in each case in this
manual.
238
•
•
™