Sony Handycam DCR-PC101E Operating Instructions Manual page 24

Step 1 Preparing the power
supply
While charging the battery pack, the CHARGE
lamp flashes in the following cases:
– The battery pack is not installed correctly.
– Something is wrong with the battery pack.
When you use the AC power adaptor
Place the AC power adaptor near a wall socket. If
any trouble occurs with this unit, disconnect the
plug from a wall socket as soon as possible to cut
off the power.
Charging time/
Battery pack/
NP-FM50 (supplied)/
NP-FM70
NP-QM71
NP-FM90
NP-FM91/QM91
Approximate minutes at 25 °C (77 °F) to charge
an empty battery pack
The charging time may increase if the battery's
temperature is extremely high or low because of
the ambient temperature.
24
Full charge/
150
240
260
330
360