Dubbing only desired scenes
– Digital program editing (on tapes)
Step 2: Setting the VCR to
operate with the i.LINK cable
When you connect using the i.LINK cable
(optional), follow the procedures below.
(1) Set the POWER switch to VCR on your
camcorder.
(2) Turn the power of the connected VCR on,
then set the input selector to DV input.
When you connect a digital video camera
recorder, set its power switch to VCR/VTR.
(3) Press FN to display PAGE1.
(4) Press MENU, then select VIDEO EDIT in
then press EXEC (p. 253).
(5) Press r/R to select TAPE, then press EXEC.
(6) Press EDIT SET.
(7) Press r/R to select CONTROL, then press
EXEC.
(8) Press r/R to select i.LINK, then press EXEC.
120
(1)
(2)
,
(3)
(4)
(5)
r R
(6)
(7)
r R
(8)
r R