Table of Contents
Advertisement
— Playback – Basics —
Playing t he disc
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder.
When you monitor the picture on the LCD screen, tilt your camcorder to its stable
position.
(1) Install the power source and insert the recorded disc.
(2) Pull out the input pen.
(3) Lift the bOPEN protrusion and open the LCD panel. Turn the LCD panel over
(4) Set the POWER switch to PLAY/EDIT while pressing the small green button.
(5) Touch the track you want to play with the input pen.
(6) Touch the track again to start playing.
2
To st op playing
Press x.
30
Downloaded from:
Adjust the length of the input pen. The length of the input pen can be
extended by 12/32 inch (about 1 cm).
and move it back into the camcorder body with the LCD screen facing out.
The tracks of recorded pictures appear on the index display.
The selected track is framed in orange.
The frame turns red.
The photo tracks are played for three seconds each.
https://www.usersmanualguide.com/
3
4
5,6
OFF
ERVIEW
01:23
REMAIN
0004
7.4.1999 2:58
00:07
PM
Advertisement
Table of Contents
