Table of Contents
Advertisement
Viewing images recorded on a tape on
your computer – For Windows users
(1) Click
.
(2) Looking at the preview widow, move the
cursor to
and click on it at the first scene
of the movie you want to capture.
changes to
.
(3) Looking at the preview window, move the
cursor to
and click on it at the last scene
you want to capture. The moving picture is
captured. Captured images are displayed in
the thumbnail list window.
Notes
•The followings may occur while you are using
your camcorder, and are not due to any
malfunction.
– The image shakes up and down.
– Some images are not displayed correctly due
to noise, etc.
– Images of different colour systems to that of
your camcorder are not displayed correctly.
•When your camcorder is in tape recording
standby with a cassette inserted, it turns off
automatically after five minutes.
•We recommend setting DEMO MODE to OFF
in the menu settings when your camcorder is in
tape recording standby without cassette.
•Indicators in your camcorder LCD screen do
not appear on images that are captured into
your computer.
If image data cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Reinstall the USB driver following the
procedure on page 227.
If any trouble occurs
Close all running applications, then restart your
computer.
Carry out the following operations after
quitting the application:
– Disconnect the USB cable.
– Change the POWER switch position to others
or set it to OFF (CHARGE).
(1)
(2)
(3)
.
233
Hide quick links:
Advertisement
Table of Contents
