Viewing Images Recorded On A "Memory Stick" On Your Computer - For Macintosh Users - Sony Handycam DCR-PC101E Operating Instructions Manual

Viewing images recorded on a
"Memory Stick" on your
computer – For Macintosh users
Viewing images
Before operation
You need to install the USB driver to view
"Memory Stick" images on your computer
(p. 239).
QuickTime 3.0 or newer must be installed to play
back moving pictures.
(1) Turn on your computer and allow Mac OS to
load.
(2) Insert a "Memory Stick" into your camcorder,
and connect the AC power adaptor to your
camcorder and then to a wall socket.
(3) Set the POWER switch to MEMORY.
(4) Connect the (USB) jack on your camcorder
with the USB port on your computer using the
supplied USB cable.
USB MODE appears on the screen of your
camcorder.
(5) Double click the "Memory Stick" icon on the
desktop.
The folders inside the "Memory Stick" are
displayed.
(6) Select and double-click the desired image file
from the folder.
Desired file type/
Still image/
Moving picture*/
* Copying a file to the hard disk of your
computer before viewing it is recommended. If
you play back the file directly from the
"Memory Stick," the image and sound may
break off.
"Dcim" folder
"Mssony" folder t "Moml0001" folder t Image file*/
*
(1)
(2)
(3)
(4)
(5)
(6)
Double-click in this order/
t "100msdcf" folder
t
t
*
t Image file/
t
t *
241