Table of Contents
Advertisement
Dubbing only desired scenes
– Digital program editing (on tapes)
Operation 2: Performing Digital
program editing
(Dubbing a tape)
Make sure your camcorder and the VCR are
connected, and that the VCR is set to recording
pause. When you use an i.LINK cable the
following procedure is not necessary.
When you use a digital video camera recorder,
set the power switch of VCR to VCR/VTR.
(1) Press MENU, then select VIDEO EDIT in
then press EXEC (p. 253).
(2) Press r/R to select TAPE, then press EXEC.
(3) Press START.
(4) Press EXEC.
Search for the beginning of the first
programme, then start dubbing.
The SEARCH indicator appears during
search, and the EDITING indicator appears
during edit on the LCD screen.
The programme mark changes to light blue
after the dubbing is complete.
When the dubbing ends, your camcorder and
the VCR automatically stop.
To stop dubbing during editing
Press CANCEL.
To finish the Digital program editing
function
Your camcorder stops when the dubbing is
complete. Then the display returns to VIDEO
EDIT in the menu settings.
Press
END to end the video edit function.
126
,
(1)
(2)
r/R
(3)
(4)
2
Hide quick links:
Advertisement
Table of Contents
