Recording a picture
from a tape as a
moving picture
Your camcorder can read moving picture data
recorded on a tape and record it as a moving
picture on a "Memory Stick." Your camcorder
can also take in moving picture data through the
input connector and record it as a moving picture
on a "Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press
. The picture recorded on the tape
is played back. And press
playback at the scene where you want to start
recording from.
(3) Press START/STOP. Images and sound are
recorded up to the remaining capacity of the
"Memory Stick." For more information about
recording time, see page 160.
2
[a]: Available recording time on the "Memory
Stick" is displayed.
[b]: This indicator is displayed for five seconds
after pressing START/STOP. This indicator
is not recorded.
To stop recording
Press START/STOP.
(1)
again to pause
(2)
(3)
3
[a]:
[b]:
4 0
min
N
POWER
LOCK
REC
320
BBB
0 : 1 5 : 4 2 : 4 3
0:00:03
[a]
15sec
[b]
FN
183