Leuze electronic MSI 200 Series User Manual page 98

Table 12-4 Solutions for communication problems between MSIsafesoft and the safety module
Problem
Transmission has been interrupted during the download pro-
cedure.
Following successful project download, the MSIsafesoft safe
configuration software identifies that the checksum of the
project on the safety module does not match that of the proj-
ect on the PC. A corresponding message window is dis-
played.
Leuze electronic
Solution
1. Start transmission again.
2. If the download fails once more, remove the USB con-
necting cable from the interface on the configuration
computer and reinsert it.
3. Once the safety module has been detected correctly (see
display in the status line), restart the download proce-
dure.
Proceed as follows:
Download the project to the safety
and acknowledge by pressing the "Confirm" button.
Checksum error
still indicated?
Yes
Download the project to another safety controller that is not currently
in use.
Checksum error
still indicated?
Yes
Please contact our technical support team.
MSI 100/200
Problems and solutions
controller again
No
No further action
required. You can start
the function test.
No
Use this safety controller
instead of the one used
first.
98