Clock/Signal Outputs - Leuze electronic MSI 200 Series User Manual

Test pulses
TM0 and TM1
Leuze electronic
The safe outputs are linked to the safety logic in the connection editor of the MSIsafesoft con-
figuration software.
You can find further information on configuring and linking the safe outputs in the help sys-
tem of the MSIsafesoft configuration software.
The safe output signals are clocked with a test pulse.
Reduced availability through test pulses
Test pulses can reduce the availability of the machine or system.
Make certain that the connected load does not react to the test pulses.
•
Use an appropriate filter terminal block if necessary.
•
4.3.3

Clock/signal outputs

You can configure outputs TM0 and TM1 of the extension module as either non-safety-rele-
vant digital signal outputs or as safe clock outputs.
The outputs are configured with the help of the configuration editor of the MSIsafesoft config-
uration software.
You can find further information on configuring and linking the clock/signal outputs in the
configuration editor in the help system of the MSIsafesoft configuration software.
MSI-EM200-8I4IO safe extension module
MSI 100/200 39