13 Maintenance, Repair, Decommissioning And Disposal; Maintenance; Repair; Decommissioning And Disposal - Leuze electronic MSI 200 Series User Manual

13 Maintenance, repair, decommissioning and disposal

Leuze electronic
13.1

Maintenance

The modules of the MSI 100/200 system are maintenance-free. Depending on the application
and the connected peripherals, the function of the peripheral devices and the safety chain may
need to be tested periodically.
Service the connected peripheral devices (e.g., light barriers) acc. to manufacturer's specifi-
cations.
The mission time and the proof test interval at high or low demand rate for the modules of the
MSI 100/200 system can be found in the technical data.
See "Technical data and ordering data" on page 101.
13.2

Repair

Repair work or changes by the user to the module are prohibited. The housing must not be
opened. If the housing is opened, the function of the MSI 100/200 modules is no longer guar-
anteed.
In case of failure, send the module to Leuze electronic or immediately contact
Leuze electronicand request a member of service staff.
13.3

Decommissioning and disposal

Decommission according to the requirements of the machine or system manufacturer.
When decommissioning the MSI 100/200 system or parts of the system, handle the used mod-
ules as follows:
Further use of the module
The modules are still used as intended.
Modules are no longer used.
Maintenance, repair, decommissioning and disposal
Measure
Observe requirements on storage and
transport according to the technical data:
see chapter 14 "Technical data and order-
ing data" on page 101.
Dispose of the modules in accordance with
environmental regulations. Ensure that the
modules cannot be used again.
MSI 100/200 100