Ac-Msi-Cfg1; Figure 3-7 Ac-Msi-Cfg1 With Msi 100/200 Safety Module; Module Behavior In Case Of Missing Ac-Msi-Cfg1 - Leuze electronic MSI 200 Series User Manual

Behavior without 

AC-MSI-CFG1

Leuze electronic
3.3.4 AC-MSI-CFG1
The safety modules are equipped with a pluggable AC-MSI-CFG1 memory module.
Figure 3-7 AC-MSI-CFG1 with MSI 100/200 safety module
After downloading the configuration from MSIsafesoft to the safety module, the configuration
is stored in the AC-MSI-CFG1 memory module.
The AC-MSI-CFG1 must be inserted in the safety module both during normal operation and
for downloading configuration data from MSIsafesoft via the USB interface.
As an alternative to downloading the configuration via the USB interface, it can also be
loaded on the safety module using the AC-MSI-CFG1.
See "Loading the configuration using the AC-MSI-CFG1 memory module" on page 84.
If no AC-MSI-CFG1 is plugged into the safety module or if it is pulled out, the safety module
behaves as follows.
Table 3-2

Module behavior in case of missing AC-MSI-CFG1

AC-MSI-CFG1 status
Stick is not plugged in while downloading the
configuration data.
Stick is not plugged in when the safety mod-
ule is started.
Stick is pulled out during running operation.
Stick is pulled out and plugged in according
to the instructions for loading the configura-
tion.
See "Loading the configuration using the
AC-MSI-CFG1 memory module" on page 84
MSI 100 and MSI 200 safety modules
Module behavior
Configuration cannot be loaded. MSIsafesoft
outputs an error message.
All outputs remain switched off. Safety mod-
ule outputs an error state. Safety module per-
forms no functions.
Safety module switches off all outputs and
outputs an error state. Safety module exe-
cutes no further functions.
The safety module switches off all outputs
and executes no functions until the stick is
plugged in again correctly. The safety mod-
ule does not indicate an error state
MSI 100/200 30