Uploading The Configuration From The Safety Module - Leuze electronic MSI 200 Series User Manual

Leuze electronic
10.4

Uploading the configuration from the safety module

Projects downloaded to the safety module are saved there and can be uploaded to the PC and
the configuration software again if required.
This may be required, for example, if a project has to be read from the safety module for diag-
nostic purposes.
It is possible to upload a project from the safety module to the configuration software without
the control password. However, to edit the uploaded project you will need the correct project
password.
To upload the project, proceed as follows:
1. If a project is currently open in the configuration software, save it before uploading the
required project from the safety module.
2. Exit commissioning mode and the online mode of the configuration software.
The "Online values" icon must not be selected prior to starting the upload and the status line
must show the control status "Control: Connected".
3. Click on the "Upload" icon in the toolbar.
4. Click "Yes" in the dialog box to confirm the upload.
Transmission from the safety module to the PC starts and a progress indicator is displayed
in the MSIsafesoft configuration software status line.
5. If a project with the same name already exists on the PC, a prompt will appear where you
must decide whether you want to overwrite the project which is already loaded or not.
In this dialog box, click on the corresponding buttons:
– "Yes" to overwrite the data of the existing project with that of the project which has
just been uploaded.
Overwriting means that the current data will be lost and cannot be recovered.
"No" to save the uploaded project under a different name or in a different directory. 
–
The "Save Project As" dialog box appears. 
Here, select a directory, enter a file name, and click "Save".
6. You are now asked to enter the project password.
Once you have entered the password you can edit and check the project, load it to the
safety module, and start it up there as usual.
Configuration and commissioning
MSI 100/200 86