Figure 3-6 Status Line In The Msisafesoft Safe Configuration Software (Safety Module Al- Ready Contains A Configuration Project) - Leuze electronic MSI 200 Series User Manual

Leuze electronic
Before connecting the safety module to the configuration PC, install the MSIsafesoft config-
uration software along with the associated USB drivers for the module.
Installing the USB drivers:
The first time a MSI 100/200 safety module is connected to the configuration PC, the "Found
New Hardware Wizard" appears. To install the drivers, proceed as follows:
1. When asked "Do you want to establish a connection with Windows Update?", select the
"No, not this time" option.
2. Now follow the USB driver installation for MSI 100/200: confirm with "Next".
a) When asked "Do you want to install this device software?", confirm your trust in the
software manufacturer by selecting the "Install" button.
3. In the "Completing the Found New Hardware Wizard" window, complete the process by
pressing the Finish button.
If the USB drivers are already installed, the appropriately configured PC detects the safety
module automatically after the USB connection cable is connected.
If the MSIsafesoft configuration software is already running, the software detects the status of
the safety module and indicates it at the bottom right in the status line.
Figure 3-6 Status line in the MSIsafesoft safe configuration software (safety module al-
ready contains a configuration project)
MSI 100 and MSI 200 safety modules
MSI 100/200 29