Safety When Starting Applications; Directives And Standards - Leuze electronic MSI 200 Series User Manual

Disconnecting the USB
connection
Observe start-up behavior
Leuze electronic
For the safe operation of the machine or system, there must be no USB connection to the
safety modules.
For further information, refer to Chapter "USB interface" on page 28.
1.4.4

Safety when starting applications

Take the following into account when defining the start conditions for your machine or system:
– The machine or system may only be started if it is ensured that no persons are located in
the danger zone.
– Comply with the requirements of EN ISO 13849-1 with regard to the manual reset func-
tion.
This applies for:
– The switching on of safe participants
– The acknowledgment of device error messages
– The canceling of start interlocks for safety functions
Some of the safe function blocks in the MSIsafesoft configuration software have parameters
for specifying a start interlock and/or a restart interlock.
For further information, refer to Chapter "System start-up and restart behavior" on page 19.
1.5

Directives and standards

The standards with which the MSI 100/200 system complies can be found in the certificate of
the approval body and the EC Declaration of Conformity.
You can find these documents on the Internet. 
See www.leuze.com.
MSI 100/200
For your safety
13