Figure 2-2 Extension Of The Msi 200 Safety Module - Leuze electronic MSI 200 Series User Manual

Leuze electronic
Use additional yellow MSI-TBUS DIN rail connectors to connect up to ten safe extension mod-
ules to the MSI 200 safety module.
GATEWAY
MSI 200
AC-MSI-TC
Ar t.-Nr. 547823
Non-safe  Safe 
communication area communication area
Figure 2-2 Extension of the MSI 200 safety module
Other standard bus participants are possible. For further information, refer to the user doc-
umentation of the used gateway at www.leuze.com.
Communication between the safe modules and the non-safe or safe extension modules takes
place automatically via the connectors of the DIN rail connectors.
See also chapter "Mounting" on page 63.
ATTENTION: Connector wear
The modules may be connected to the DIN rail connectors a maximum of eight mating
cycles.
Note the maximum permissible continuous current for extension modules supplied via the
MSI-TBUS as well as the technical data of the MSI 100/200 system.
See Chapter "Technical data and ordering data" on page 101.
AC-MSI-TCS
Ar t.-Nr. 547821
MSI 100/200
System description
MSI-EM200 MSI-EM200
8I4I0/4RO 8I4I0/4RO
17