11 Diagnosis
MSIsafesoft diagnosis
Diagnosis via gateways
Leuze electronic
Information on hardware diagnosis, wiring checks and tool tips can be found in the help sys-
tem of the MSIsafesoft configuration software.
You can connect your MSI 100/200 system with gateways to a primary control. The reading
out of the diagnosis is bus-specific.
Information on diagnosis via gateways can be found in the respective user manual of the
gateway.
See www.leuze.com.
You can find suitable gateways for use with the MSI 100/200 system in the accessories chap-
ter "Gateways" on page 118.
11.1
Diagnosis via LED indicators on the module
The following tables list the possible indicator combinations for the diagnostic and status indi-
cators and their meanings. A distinction is made between slow flashing and fast flashing LEDs.
The LED symbols in the tables mean:
LED is off
LED is on
LED flashes: slowly ≈ 2 Hz / quickly ≈ 6 Hz
If there is an S below an LED symbol, this LED indicator applies only for the
S
MSI 100.
If there is an M below an LED symbol , this LED indicator applies only for the
M
MSI 200.
MSI 100/200
Diagnosis
89