Graphical Connection Editor; Configuration Editor; Table 12-2 Solutions For Problems With The Graphical Connection Editor; Table 12-3 Solutions For Problems With The Configuration Editor - Leuze electronic MSI 200 Series User Manual

Table 12-2 Solutions for problems with the graphical connection editor
Problem
You have attempted to open a project, but the safety logic
could not be loaded due to a checksum error.
A corresponding message window is displayed.
During editing, a message window appears where the con-
nection editor reports damaged data, a sporadic error or a
systematic error.
Table 12-3 Solutions for problems with the configuration editor
Problem
You have attempted to open the configuration editor, but
the data could not be loaded due to a checksum error.
A corresponding message window is displayed.
The configuration editor responds unexpectedly to an entry
in the parameter table, e.g., by displaying something other
than what has been entered or selected.
This may be traced back to a sporadic error or a systematic
error.
During editing, a message window appears in which the
configuration editor reports damaged data, a sporadic error
or a systematic error.
Leuze electronic
12.2

Graphical connection editor

12.3

Configuration editor

Solution
The project concerned is damaged and can no longer be
used.
Use the latest backup copy of the project (as described in
the help system under "Zipping and extracting projects").
If the problem persists, please contact Leuze electronic
technical support.
The project is closed automatically. You do not have the
opportunity to save the most recently made changes.
If the problem persists when the project is reopened, please
contact Leuze electronic technical support.
Solution
The project can no longer be used, as the configuration
data cannot be deleted.
Use the latest backup copy of the project (as described in
the help system under "Zipping and extracting projects").
Undo the last entry (by pressing <Ctrl>+<Z>), then repeat
the entry.
If the result is still incorrect, please contact Leuze electronic
technical support.
The project is closed automatically. You do not have the
opportunity to save the most recently made changes.
If the problem persists when the project is reopened, please
contact Leuze electronic technical support.
MSI 100/200
Problems and solutions
96