Msisafesoft Configuration Software; Installing Software - Leuze electronic MSI 200 Series User Manual

9

MSIsafesoft configuration software

Installation
Leuze electronic
9.1

Installing software

The installation routine for the configuration software includes the installation of the driver for
the USB interface. The driver enables communication between the PC and the modules of the
MSI 100/200 system.
To ensure that the safety modules are automatically and correctly detected by the configu-
ration software, the software must be fully installed before the device is connected to the PC
the first time.
Proceed as follows:
If you have downloaded the configuration software: 
1.
Extract the downloaded file and start the installation program (setup file).
If you purchased the configuration software on CD: 
Insert the CD in the drive. A menu opens automatically. Start the installation program via
menu item "Install software".
If you have deactivated the auto start option on your computer, open the "MSIsafesoft" folder
on the CD-ROM and execute the setup file.
2. Select the desired language for the installation routine.
This selection also sets the language for the MSIsafesoft user interface, which is set when
the software is started for the first time.
The installation program now guides you through the installation step by step.
3. Follow the instructions on the screen.
Once MSIsafesoft is installed, you will be prompted to install the drivers for the safety module.
4. Follow the instructions on the screen.
5. In the Windows dialog box for driver installation, select "Install the software automatically
(recommended)".
Finally, a message appears indicating that the configuration software and drivers for the safety
module have been fully installed.
MSIsafesoft configuration software
MSI 100/200 75