Agilent M9392A Modular Instrument Connections; Agilent M9392A Pxi Vector Signal Analyzer Cabling Diagram - Keysight M9392A Startup Manual

Pxi vector signal analyzer 50 mhz to 26.5 ghz
Table of Contents

Advertisement

Agilent M9392A Modular Instrument Connections

This section contains a cabling diagram for the Agilent M9392A PXI Vector Signal Analyzer, a cable and module
association table, and a block diagram for the M9392A.

Agilent M9392A PXI Vector Signal Analyzer Cabling Diagram

Cable and Module Table
Ships
with
Ref
Agilent Part
Module
Des
Number
M9360A
A1
M9360-20001
M9351A
A2
M9351-20001
M9361A
A3
M9361-20001
M9361A
A4
M9361-20002
M9351A
A5
M9351-20002
M9351A
B1
8120-5016
M9351A
B2
8121-2072
M9202A
C3
8120-5531
M9202A
C4
8121-2042
M9202A
*
8121-2041
M9202A
*
8121-2041
Torque specification for all SMA connectors is 8 Lb-In (0.904 Nm).
*
These cables are not required to configure an Agilent M9392A PXI Vector Signal Analyzer. See the Agilent M9392A PXI
Vector Signal Analyzer Cabling Diagram above. These cables are provided for using the Agilent M9202A PXIe IF Digitizer
in other applications.
No cables are shipped with the Agilent M9302A PXI Local Oscillator module.
Agilent M9392A PXI Vector Signal Analyzer Startup Guide
Connection
M9302A LO OUT – M9360A LO IN
M9360A RF 1 OUT – M9351A RF IN
M9360A RF 2 OUT – M9361A RF IN
M9360A LO 2 OUT – M9361A LO IN
M9360A LO 1 OUT – M9351A LO IN
M9351A REF IN – M9302A REF 1 OUT
M9351A IF OUT – M9361A AUX IN
M9361A IF OUT – M9202A INPUT 1
M9302A REF 2 OUT – M9202A REF IN
n/a
n/a
Step 4: Install the Modules
Recommendation: Install the
semi-rigid ("A") cables first.
cables from SMB and MMCX
connectors, See
MMCX Cable and Connector
Care" on page 16.
NOTE: For best measurement
performance, connect a high-
quality 10 MHz reference to the
M9302A 10 MHz REF IN input. If
no other reference is available,
connect the 10 MHz reference
supplied on the back of the PXI
chassis.
Cable Description
Cable, semi-rigid, Master LO (SMA-SMA)
Cable, semi-rigid (SMA-SMA)
Cable, semi-rigid (SMA-SMA)
Cable, semi-rigid (SMA-SMA)
Cable, semi-rigid (SMA-SMA)
Cable, coaxial, SMB-SMB (160 mm)
Cable, coaxial, SMB-SMB (75 mm)
Cable, SMB - SMA coaxial (190 mm)
Cable, A06/A32 80G (SMB-MMCX)
Cable, A06/A32 190G (SMB-MMCX)
Cable, A06/A32 190G (SMB-MMCX)
Before removing
"SMB and
15

Advertisement

Table of Contents
loading

Table of Contents