Cisco TelePresence Server 7010 Product User Manual page 90

Field Field description
Connection Whether this TelePresence Server is
status connected to the Conference controller
TelePresence Server.
Licenses The number of screen licenses.
Model The TelePresence Server model.
Serial number The unique serial number of the
TelePresence Server.
Software The installed software version. You will
version need to provide this information when
speaking to customer support.
Build The build version of installed software. You
will need to provide this information when
speaking to customer support.
Fans For enabled TelePresence Servers, shows
Voltages Current status/Worst status seen conditions.
RTC battery
Cisco TelePresence Server Product User Guide
TelePresence Server status reference
TelePresence Servers
Usage tips
One of:
Waiting for IP address
n
Connecting...
n
Connected: Waiting for final phase...
n
OK
n
Failed to connect to IP address <IP
n
address>. Retrying in <X> seconds
Connection failed
n
Retrying dropped connection in <X>
n
seconds
Disabled
n
Disabled - only conference controllers can
n
manage other systems
There is a health status problem
n
Encryption not supported
n
Gatekeeper registration failed
n
For more information about licenses, see
Understanding screen licenses.
For each of current and worst seen
conditions, one of
OK: component is functioning properly
n
Out of spec: check with your support
n
provider; component might require service
If the Worst status seen column displays Out
of spec, but Current status is OK, monitor the
status regularly to verify that it was only a
temporary condition.
This field is not displayed for Disabled
TelePresence Servers.
Page 90 of 151