Event Capture Filter - Cisco TelePresence Server 7010 Product User Manual

Event capture filter

The event capture filter defines which events the TelePresence Server will keep in the log. By default
this filter is configured to capture Errors, warnings and information from all the TelePresence Server sub-
systems.
Note: You should not modify this filter unless you are doing so with advice from a support representative.
For example, when troubleshooting a TelePresence Server issue, a support representative may ask you
to capture detailed trace for the video sub-system:
1. Go to Logs > Event capture
2. Select Detailed trace from the VIDEO dropdown.
The TelePresence Server warns you that performance may be affected.
3. Click OK (this is a temporary elevation in detail that you can reverse after your issue is resolved).
4. Click Update settings.
The TelePresence Server will capture detailed trace information from the video sub-system, as well as
the default information for all other sub-systems.
Cisco TelePresence Server Product User Guide
filter.
Logs
Page 121 of 151