Cisco TelePresence Server 7010 Product User Manual page 64

Hide thumbs Also See for TelePresence Server 7010:
Table of Contents

Advertisement

Field
Field description
Video
Enable a limit on the video ports allowed for
this conference
Audio only
Enable a limit on the number of audio only
ports allowed for this conference
Show lobby
Enable a lobby screen for this conference.
screen
Lobby
Display a custom message on the lobby
message
screen.
Field
Field description
Schedule
Select the check box to enable the settings
in this section.
Start time
The date and time at which the conference
will begin.
Cisco TelePresence Server Product User Guide
Port limits and lobby settings
Scheduling
Usage tips
Check the box and enter the maximum
number of video ports you want this
conference to use.
The TelePresence Server can not guarantee
to provide this number of ports. However, if
more than this number are requested and
available, the TelePresence Server will
supply ports until the limit is reached.
Check the box and enter the maximum
number of audio only ports you want this
conference to use.
The TelePresence Server can not guarantee
to provide this number of ports. However, if
more than this number are requested and
available, the TelePresence Server will
supply ports until the limit is reached.
The lobby screen can be enabled/disabled
on a server-wide basis. If you select <Use
default> here, the conference will inherit the
setting from the
Configuration > System
settings
page.
Otherwise, you can select Enable or Disable
to override the server-wide setting.
Enter some text to display on the lobby
screen.
If Show lobby screen is enabled—either
because it is enabled by the server-wide
setting or enabled for this conference only—
participants will see this text when they see
the lobby screen.
Usage tips
Conferences can be scheduled using the
fields in this section, but you may also want
to create a conference without a set start time
(in this case, leave this setting unselected).
Subsequently, when you want the
conference to start, open the conference
configuration, add endpoints and click Start
now.
By default the current date and time are
displayed.
Conferences
Page 64 of 151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence server mse 8710 blade

Table of Contents