Cisco TelePresence Server 7010 Product User Manual page 48

Additionally, if it's a Cisco TelePresence Server 7010, then the port licence key is also entered here.
To activate the TelePresence Server or enable an advanced feature:
1. Read the Activated features list to check whether the feature you require is already activated.
Product activation is also in this list, which shows feature names and activation keys.
2. Enter the code given to you by your supplier into the Activation code field exactly as you received it,
including any dashes.
3. Click Update features.
The browser window refreshes to list the newly activated feature and the code you entered.
If the activation code is not valid, you are prompted to re-enter it.
Activation codes may be time-limited. If this is the case, an expiry date will be displayed, or a warning
that the feature has already expired. Expired activation codes remain in the list but the corresponding
features are not activated.
4. Record the activation code in case you need to re-enter it in the future.
Successful TelePresence Server or feature activation has immediate effect and will persist even if the
TelePresence Server is restarted.
Note that you can remove some types of features. Click remove, next to the feature key, to remove a
feature.
Upgrade the font
Your TelePresence Server may be shipped with the TrueType font pre-installed. You can check this on
the Status or Configuration > Upgrade
If the font is not present, and you want to use TrueType text rendering on your TelePresence Server
instead of the default text rendering method, you must upload the font file which is supplied by your
TelePresence Server vendor:
Note: You should do this when the TelePresence Server is not heavily loaded. Also, you must use the
supplied font; do not attempt to load a different font file.
1. Click the button to locate and select your font file.
2. Click Upload font.
The Font file status changes to Present.
Downgrade the font
1. If you want to revert to the default text rendering, click Delete font.
2. Confirm that you want to remove the font file.
The Font file status changes to Not present.
Cisco TelePresence Server Product User Guide
pages.
Configuration
Page 48 of 151