Configuring Ip Services - Cisco TelePresence Server 7010 Product User Manual

Configuring IP services

To configure IP services, go to Network > Services.
Use this page to allow or deny access to the listed web services on the TelePresence Server. Refer to
the table below for more details.
The TelePresence Server offers web services, such as HTTP for the web interface and H.323 for making
and receiving calls. You can control which services may be accessed on the unit's Ethernet interfaces
and the TCP/UDP ports through which those services are available.
Check the boxes next to the service names, edit the port numbers if necessary, and then click Apply
changes.
If you want to reset the values to their default settings, click Reset to default and then click Apply
changes.
Field Field description
Web Enable/disable web access on the
appropriate port.
Secure web Enable/disable secure (HTTPS) web
access on the specified interface or change
the port that is used for this service.
Incoming Enable/disable the ability to receive
H.323 incoming calls to the TelePresence Server
using H.323 or change the port that is used
for this service.
SIP (TCP) Allow/reject incoming calls to the
TelePresence Server using SIP over TCP or
change the port that is used for this service.
Cisco TelePresence Server Product User Guide
TCP service
Usage tips
Web access is required to view and change
the TelePresence Server web pages and
read online help files. If you disable web
access on Port A you will need to use the
serial console interface to re-enable it.
If a port is disabled, this option will be
unavailable.
This field is only visible if the TelePresence
Server has the Encryption feature key
installed. For more information about
installing feature keys, refer to
and backing up the TelePresence
By default, the TelePresence Server has its
own SSL certificate and private key.
However, you can upload a new private key
and certificates if required. For more
information about SSL certificates, refer to
Configuring SSL
If a port is disabled, this option will be
unavailable.
Disabling this option will not prevent
outgoing calls to H.323 devices being made
by the TelePresence Server.
If a port is disabled, this option will be
unavailable.
Disabling this option will not prevent
outgoing calls to SIP devices being made by
the TelePresence Server.
If a port is disabled, this option will be
unavailable.
Network settings
Upgrading
Server.
certificates.
Page 25 of 151