Configure Advanced Settings Of Endpoints And Groups - Cisco TelePresence Server 7010 Product User Manual

Configure advanced settings of endpoints and groups

1. Go to Endpoints
2. Click the endpoint or group name
3. Go to Advanced settings
4. Configure the advanced settings with reference to the following table
5. Click Update endpoint.
Field Field description
Video The format to be transmitted by the
format TelePresence Server to an
endpoint or endpoint group.
Transmitted The setting for transmitted video
video resolutions from the Cisco
resolutions TelePresence Server to this
endpoint or endpoint group.
Motion / The settings for motion (frames
sharpness per second) and sharpness (frame
trade off size or resolution) are negotiated
between the endpoint or endpoint
group and the Cisco
TelePresence Server. This setting
controls how the Cisco
TelePresence Server will
negotiate the settings to be used.
Cisco TelePresence Server Product User Guide
Video settings
Usage tips
This setting can be overridden by a setting for an
individual endpoint or endpoint group in the
settings.
NTSC is typically used in North America, while PAL is
typically used in the UK and Europe.
Select a setting from the drop-down list:
PAL - 25fps: The TelePresence Server will transmit
n
video at 25 frames per second (or a fraction or
multiple of 25, for example: 50 or 12.5fps)
NTSC - 30 fps: The TelePresence Server will transmit
n
video at 30 frames per second (or a multiple or
fraction of 30, for example: 60 or 15fps)
Select a setting from the drop-down list:
4:3 resolutions only
n
16:9 resolutions only
n
Allow all resolutions
n
Endpoints advertise the resolutions that they are able to
display. The Cisco TelePresence Server then chooses
the resolution that it will use to transmit video from those
advertised resolutions. However, some endpoints do not
display widescreen resolutions optimally. Therefore, you
might want to use this setting to restrict the resolutions
available to the Cisco TelePresence Server for
transmissions to this endpoint or endpoint group.
Select a setting from the drop-down list:
Favor motion: the Cisco TelePresence Server will try
n
and use a high frame rate. That is, the Cisco
TelePresence Server will strongly favor a resolution of
at least 25 frames per second
Favor sharpness: the Cisco TelePresence Server will
n
use the highest resolution that is appropriate for what
is being viewed
Balanced: the Cisco TelePresence Server will select
n
settings that balance resolution and frame rate (where
the frame rate will not be less than 12 frames per
second)
Endpoints and endpoint groups
Advanced
Page 82 of 151