Cisco TelePresence Server 7010 Product User Manual page 79

Field Field description
Name The name that the endpoint
or endpoint group sends to
the Cisco TelePresence
Server.
Address The IP address of the
endpoint or endpoint group.
E.164 For H.323 calls, the E.164
address with which the
endpoint or endpoint group
is registered with the
gatekeeper.
For SIP calls, the SIP
username with which the
endpoint or endpoint group
is registered with the SIP
registrar.
Field Field Usage tips
description
Audio Whether the If set to Muted, when the endpoint or endpoint group joins a conference, it will not be
from initial audio able to contribute audio to the conference. For example, you can mute audio from an
from the endpoint or endpoint group if somebody wants to be seen in the conference, but
endpoint or does not want to contribute verbally. You can mute both audio and video if required.
endpoint This can be altered during the course of the conference either in the endpoint's or
group is endpoint group's status page, or from the relevant conference's status page.
either Active
or Muted.
Audio Whether the If set to Muted, when the endpoint or endpoint group joins a conference, the
to initial audio participant using this endpoint or endpoint group will not be able to hear the other
to this participants. This can be altered during the course of the conference either in the
endpoint or endpoint's or endpoint group's status page, or from the relevant conference's status
endpoint page.
group is
either Active
or Muted.
Video Whether the If set to Muted, when the endpoint or endpoint group joins a conference, it will not be
from initial video able to contribute video to the conference. For example, you can mute video from an
from this endpoint or endpoint group if somebody wants to see the conference, but not be
endpoint or seen themselves. You can mute both audio and video if required. This can be
endpoint altered during the course of the conference either in the endpoint's or endpoint
group is group's status page, or from the relevant conference's status page.
either Active
or Muted.
Cisco TelePresence Server Product User Guide
Call-in match parameters
Usage tips
These fields are used to identify incoming calls as being from the
endpoint or endpoint group.
The endpoint or endpoint group is recognized if any of this
information matches the identification sent by the endpoint. The
TelePresence Server ignores empty fields when it is trying to
match the endpoint.
When you configure Call-in match parameters, an endpoint or
endpoint group will be recognized as this pre-configured
endpoint or endpoint group and the Initial status parameters will
be applied to a call from this endpoint or endpoint group.
Note: For CTS systems, we recommend using the CTS directory
number (DN) in the E.164 field.
Initial status
Endpoints and endpoint groups
Page 79 of 151