Cisco TelePresence Server 7010 Product User Manual page 36

Field Field description
Outbound The domain of the SIP registrar or trunk
domain destination.
Username The TelePresence Server uses this name if
it registers with a SIP registrar. In the case
where multiple TelePresence Servers are
controlled by one, the others register the
same name with numerical suffixes (e.g. _2,
_3).
The TelePresence Server uses this name to
authenticate with the SIP device (registrar,
trunk destination, or endpoint) if that device
requires authentication.
Password The TelePresence Server uses this
password to authenticate with the
SIP device (registrar, trunk destination, or
endpoint) if that device requires
authentication.
Cisco TelePresence Server Product User Guide
Usage tips
The TelePresence Server ignores this field if
Outbound call configuration is set to Call
direct.
The TelePresence Server uses this value in
the following ways:
username@outbounddomain to register a
n
user with a SIP registrar (if SIP registration
is enabled)
numericId@outbounddomain to register
n
a conference's numeric ID with a
SIP registrar (if conference has
SIP registration enabled)
Any outbound SIP calls where the
n
supplied address does not contain an @
symbol.
If you do not specify an outbound domain,
the TelePresence Server uses the outbound
address instead.
The TelePresence Server will use this name
to register itself with the SIP registrar if you
have enabled SIP registration. It won't
register itself if you don't provide this, but it
will still be able to register individual
conferences (assuming they are enabled to
register and have numeric IDs).
If a conference does not have a numeric ID,
then it cannot register. Calls out from such a
conference will appear to come from the
TelePresence Server's own SIP registration
(this_username@outbounddomain). It is
impossible for a participant to call into such a
conference because it does not have a
numeric ID.
If you enter a full URI here (e.g.
host@domain), then the TelePresence
Server will ignore the Outbound domain
setting.
The SIP destination may not require
authentication; if it does, you need to
configure it to accept a log in from this
username and password combination.
Configuration
Page 36 of 151