Adding Or Updating Controlled Telepresence Servers - Cisco TelePresence Server 7010 Product User Manual

Adding or updating controlled TelePresence Servers

Adding a controlled TelePresence Server to the Conference controller
Note: Before you can add the controlled TelePresence Server to the Conference controller, you must
configure it to be managed by an external controller (see
1. On the Conference controller, go to
2. Enter the details of the controlled TelePresence Server using the following table for reference.
3. Click Add new TelePresence Server.
Updating a TelePresence Server details on the Conference controller
1. On the Conference controller TelePresence Server go to
2. Click on the name of the TelePresence Server you want to edit.
3. Edit the details of the controlled TelePresence Server using the following table for reference.
4. Click Update TelePresence Server.
The controlled TelePresence Server's status information is displayed below its configuration information.
Field Field description
Name The name of the TelePresence Server.
Address The IP address of the TelePresence Server.
HTTP port The TCP port number on the TelePresence
Server which the Conference controller
TelePresence Server will attempt to connect
to if it is configured to use HTTP for this
connection.
HTTPS port The TCP port number on the TelePresence
Server which the Conference controller
TelePresence Server will attempt to connect
to if it is configured to use HTTPS for this
connection.
Use HTTPS When selected, this TelePresence Server
will connect to the Conference controller
TelePresence Server using HTTPS.
Enabled Whether this TelePresence Server is
enabled.
Cisco TelePresence Server Product User Guide
TelePresence Servers > Add new TelePresence
TelePresence Server configuration reference
Understanding the Conference
TelePresence Servers.
Usage tips
This field is only displayed when you add a
TelePresence Server.
This field is only displayed when you add a
TelePresence Server.
This field is only displayed when you add a
TelePresence Server.
If this option is selected, the TelePresence
Server will use the HTTPS port value
configured for the Conference controller
TelePresence Server, otherwise it will use
the HTTP port value.
If a TelePresence Server is not enabled, no
conferences will be allocated to run on it by
the Conference controller.
TelePresence Servers
controller).
Server.
Page 89 of 151