Cisco TelePresence Server 7010 Product User Manual page 58

Field Field description
Endpoint The names of the endpoints currently
participating in the active conference.
Type The endpoint type.
Status The status of the endpoint.
More... Click More... to see previews of the transmit
and receive streams. You can also control
the endpoint's contribution to the
conference.
Click [Expand / Collapse All] to show more
status information for all endpoints in the
list.
Field Field description
Endpoint The names of endpoints that were
previously in this conference.
Type The endpoint type.
Cisco TelePresence Server Product User Guide
All participants
Usage tips
If the conference is not active, this section
shows No endpoints.
To remove a participant from the conference:
select the appropriate check box and select
Disconnect selected
Click on the endpoint's name to go to its
Status
One of:
No endpoints - the conference has no
n
active participants
Not in a conference - the endpoint is not
n
active
In conference - the endpoint is currently
n
participating in this conference. Additional
status information may be displayed, for
example, audio muted.
If a pre-configured endpoint is busy when the
conference starts, the TelePresence Server
will retry the endpoint repeatedly throughout
the conference and connect it if it becomes
free.
You can:
mute
mute
make a participant important (transmit stream
only)
Previous participants
Usage tips
To reconnect participants to the conference:
select the appropriate check boxes and
select Retry connection.
Click on the endpoint's name to go to its
Status
page.
and unmute audio
and unmute video
or unimportant
page.
Page 58 of 151
Conferences