Cisco TelePresence Server 7010 Product User Manual page 63

Hide thumbs Also See for TelePresence Server 7010:
Table of Contents

Advertisement

Field
Field description
Conference
Locks a conference.
locked
Encryption
Whether encryption is optional or required
for this conference.
Use OneTable
Whether to use OneTable mode
mode when
automatically when the correct combination
appropriate
of endpoints or endpoint groups is in a
conference (three or four telepresence
endpoints plus less than six other endpoints
or endpoint groups).
Choose from:
Disabled
n
2 person mode
n
4 person mode
n
Content
If Enabled, this conference is able to
channel
support an additional video stream, sent
potentially to all connected endpoints,
intended for showing content video.
This content video is typically high
resolution, low frame rate data such as a
presentation formed of a set of slides. Such
presentation data can be sourced by an
endpoint specifically contributing a
separate content video stream.
Cisco TelePresence Server Product User Guide
Usage tips
Check the box to lock the conference. You
can still add pre-configured participants
before the conference starts, but no
participants will be able to join (call in) when
the conference is active.
You can call out to invite participants in to a
locked conference.
If encryption is Required, only endpoints that
support encryption can join this conference.
Encryption requires a feature key. Feature
keys are installed in the
Configuration >
Upgrade
page. See
Upgrading and backing
up the TelePresence Server.
In OneTable mode each screen shows an
entire view of a single remote site (as
opposed to one third of the remote site in a
normal, point-to-point telepresence setting).
This allows the center four or two participants
in three remote telepresence rooms to be
seen simultaneously, as if they were seated
at one table - depending on whether 4
person mode or 2 person mode is selected.
For more information, see
Understanding
how participants display in layout
Not all multi-screen endpoints support
OneTable mode. See the
endpoint
interoperability reference
for a list of
supporting endpoints.
For more information, see
Content channel
video
support.
Conferences
views.
Page 63 of 151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence server mse 8710 blade

Table of Contents