Add An Endpoint Group - Cisco TelePresence Server 7010 Product User Manual

Hide thumbs Also See for TelePresence Server 7010:
Table of Contents

Advertisement

Add an endpoint group

Note: A multi-screen endpoint is not the same as an endpoint group.
You can configure individual endpoints to work as a single, immersive endpoint. To use this feature you
must have the "Third party interop" feature key installed. You can install feature keys on the
Configuration > Upgrade
To add an endpoint group:
1. Go to
Endpoints > Add grouped
2. Enter the Name of the group and the addresses of its members. See the first table below.
3. Click Add grouped endpoints.
4. Configure the endpoint group in the same way as you would configure an individual endpoint. Refer to
the
edit endpoint topic
Endpoint group members
Field
Field description
Name
The name of the group.
Calling out
The list of addresses to call out to when this
address list
group is in an active conference.
Use
Select this check box to use a gatekeeper
gatekeeper
when calling this group.
Cisco TelePresence Server Product User Guide
page. (See
Upgrading and backing up the Cisco TelePresence
endpoints.
for details of the settings.
Endpoint group settings
Endpoints and endpoint groups
Usage tips
Enter a list of addresses separated by
commas.
Note: The order must be from left to right in
terms of facing the endpoints' screens.
This setting has no effect if the Cisco
TelePresence Server is not configured to use
a gatekeeper in the
Configuration > System
settings
page.
Server.)
Page 76 of 151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence server mse 8710 blade

Table of Contents