Cisco TelePresence Server 7010 Product User Manual page 112

Start a conference
When you log into the TelePresence Server, you'll see a list of endpoints or endpoint groups that you
may invite to join your conference:
1. Select the endpoints or endpoint groups that you want to participate in the conference.
You may also be able to call an endpoint that is not on the list; if so, you'll see an item labeled with
Enter an address rather than with a name or address. Check the box and enter the address of the
endpoint you want to invite.
2. Click Call.
The conference is now active. You can participate using the endpoint associated with your room. You
can also control the endpoints from the web interface (see below).
3. To end this conference, click End.
Endpoint controls
While the conference is active, you can use the web interface to control the endpoints that are
participating:
Button Function
Invite the endpoint.
Disconnect the endpoint.
Mute or unmute the participant's video stream.
Mute or unmute the participant's audio stream.
Click the endpoint picture to make that participant important; the TelePresence Server will display
this participant as prominently as possible.
Cisco TelePresence Server Product User Guide
Endpoint controls in a room's web interface
Rooms
Page 112 of 151