Cisco TelePresence Server 7010 Product User Manual page 40

Field Field description
Full screen view This option sets the conditions under
of single-screen which single-screen endpoints are placed
endpoints in full screen panes of video displays sent
to conference participants.
Show borders Select this option to show borders around
around endpoints participants displayed in the conference
view sent to new endpoints/endpoint
groups by default.
Active speaker Select this option to show a red border
display around the active speaker.
Show endpoint If you select this option, the TelePresence
names as panel Server will label view panes in the
labels conference layout sent to new
endpoints/endpoint groups by default with
the names of the participants shown in
those panes.
Show continuous Select this option to allow a mixture of
presence panes small and large panes in the view sent to
new endpoints by default so that
additional participants can be displayed.
Self view If you unselect this option, the
TelePresence Server will never show the
video stream sent from this endpoint or
endpoint group to the participants using
this endpoint or endpoint group by default
i.e. they will not see themselves.
Cisco TelePresence Server Product User Guide
Default endpoint settings
Usage tips
This setting can be overridden by the
equivalent Full screen view setting in
single-screen endpoints' Configuration
page.
Select a setting from the drop-down list to
be used as the default:
Allowed: Single-screen endpoints will
n
always be allowed to be shown in full
screen panes.
Dynamic: Single-screen endpoints will
n
be allowed to be shown in full screen
panes if there are no grouped endpoints
to show. However, when there are
grouped endpoints to show, single-
screen endpoints will then be restricted
to the smaller continuous presence
panes.
Disabled: Single-screen endpoints will
n
never be shown in full screen panes.
For more information, see Understanding
how participants display in layout
This setting can be overridden by the
setting in the equivalent field in the
endpoint's or endpoint group's
Configuration page.
This setting is only available if Show
borders around endpoints (detailed
above) is selected.
This setting can be overridden by the
setting in the equivalent field in the
endpoint's or endpoint group's
Configuration page.
For more information, see Understanding
how participants display in layout
This setting can be overridden by the
setting in the equivalent field in the
endpoint's or endpoint group's
Configuration page.
For more information, see Understanding
how participants display in layout
This setting can be overridden by the
setting in the equivalent field in the
endpoint's or endpoint group's
Configuration page.
Configuration
views.
views.
views.
Page 40 of 151