Event Capture Filter - Cisco TelePresence 7010 Help Manual

Logs

Event capture filter

The event capture filter defines which events the TelePresence Server will keep in the log. By default this
filter is configured to capture Errors, warnings and information from all the TelePresence Server sub-
systems.
Note: Only modify this filter if doing so with advice from Customer Support.
For example, when troubleshooting a TelePresence Server issue, a support representative may ask you to
capture detailed trace for the video sub-system:
1. Go to Logs > Event capture
2. Select Detailed trace from the VIDEO drop-down list.
The TelePresence Server warns you that performance may be affected.
3. Click OK (this is a temporary elevation in detail that you can reverse after your issue is resolved).
4. Click Update settings.
The TelePresence Server will capture detailed trace information from the video sub-system, as well as
the default information for all other sub-systems.
Cisco TelePresence Server 7010 and MSE 8710 in Remotely Managed Mode Printable Help (4.0)
filter.
Page 65 of 92