ABB FSPS-21 User Manual page 37

ou ignore them, injury or death, or damage to the
1
o. Description
Lock
Mounting and grounding screw
RJ-45 connector [X1] to Ethernet
RJ-45 connector [X2] for chaining another module
Diagnostic LEDs
3. Push in the lock.
3
4
4. Tighten the screw to torque 0.8 N·m using a Torx TX10 screwdriver.
WARNING!
Do not use excessive force, or leave the screw too loose. Overtightening can
damage the screw or module. A loose screw decreases the EMC performance,
and can even cause an operation failure.
See the drive manual for further instructions on how to install the module to the drive.
Mechanical installation 37
10