ABB FSPS-21 User Manual page 127

WARNING!
Do not use this configuration example in real applications. This configuration is
only an example.
Before you use the safety configuration and programming tools in Automation Builder, you
must study the AC500-S Safety PLC user manual (AC500-S Safety User Manual
(3ADR025091M0202 [English]). Only qualified persons are allowed to work with the AC500-S
Safety PLC.
You need a password to configure the safety parts of a Automation Builder project. In all
new projects, there is a default user "Owner" with an empty password. This is a project
administrator who can, for example, access the safety controller station. For detailed
information on the passwords and access permissions in Automation Builder, see the
AC500-S Safety PLC user manual.
You can find the complete documentation of ABB PLCs and the Automation Builder
application in www.abb.com/PLC.
Before you start, make sure that you have downloaded the FSPS-21 GSD file from the ABB
Document library. See section .
1. Start the ABB Automation Builder application.
2. On the Tools menu, select Device Repository.
3. In the window that opens, click Install... and browse for the GSD file.
4. Open or create the PLC project that is used to control the drive.
PROFIsafe 127