ABB FSPS-21 User Manual page 205

Appendix A – PROFIdrive parameters and I&M records of PROFINET IO 205
1)
Par. no. R/W Data type
970 R/W Unsigned16
971 R/W Unsigned16
972 R/W Unsigned16
975 R Array[n] Unsigned16
980 R Array[n] Unsigned16
981
1000 R/W Unsigned16
50000 R/W Unsigned16
61000 R VisibleString24
61001 R Unsigned32
61002 R OctetString[6]
61003 R Unsigned32
Description
Load parameter record
Value Description
0 No action
1 Restore factory settings
The parameter must do a zero-to-one transition and the
motor must be stopped.
Save parameter record
Value Description
0 No action
1 Save the drive parameters to non-volatile
memory
The parameter must do a zero-to-one transition and the
motor must be stopped.
Software reset
Value Description
0 No action
1 Re-boot PROFIBUS module
The parameter must do a zero-to-one transition and the
motor must be stopped.
DO identification. For subindexes 0...4, see parameter 964.
Sub-index Meaning
5 Value 2 = Axis
Number list of defined parameters. If the subindex is 0, the
end of the list has been reached. If the subindex is the num-
ber of the next list parameter, the list is continued there.
3)
Map 16-bit selection . Used to request the data type for
mapped parameters if mapping is done with parameter 915
or 916.
Value Description
1 User 16-bit mapping, if available.
Disable alarms.
Value Description
0 PNIO alarms enabled
1 PNIO alarms disabled
Name of station
IP of station
MAC address of station
Default gateway of station