Performing A Control Test - Accu-Chek Guide Me User Manual

Control Tests
4

Performing a Control Test

NOTE
• Most people just test the Level 1 control. If you wish, you can also test a Level 2 control. A set of
Level 1 and Level 2 control solutions is available for purchase.
• The ranges for Level 1 and Level 2 controls are printed on the test strip container label.
• The meter turns off 90 seconds after a successful test or 15 seconds after the test strip is removed,
provided no other action is taken.
You need the meter, a test strip, and control solution Level 1 or Level 2.
1
Check the Use By date on
the test strip container. Do
not use test strips past the
Use By date.
26
1080_Guide Me_MANUAL_MASTER.indb 26
2
Remove a test strip from the
test strip container.
Close the cap tightly.
3/5/2018 1:27:51 PM