Table of Contents
Advertisement
Additional Supplies
Test Strips: Accu-Chek Guide test strips
Control Solutions: Accu-Chek Guide control solutions
Lancets: Accu-Chek FastClix 102-ct. lancet drums (17 6-ct. drums)
References
FDA Public Health Notification: "Use of Fingerstick Devices on More than One Person Poses Risk for
1
Transmitting Bloodborne Pathogens: Initial Communication, (2010). Update 11/29/2010."
http://wayback.archive-it.org/7993/20161022010458/http://www.fda.gov/MedicalDevices/Safety/
AlertsandNotices/ucm224025.htm. Accessed January 17, 2018.
CDC Clinical Reminder: "Use of Fingerstick Devices on More than One Person Poses Risk for
2
Transmitting Bloodborne Pathogens, (2010)." http://www.cdc.gov/injectionsafety/Fingerstick-
DevicesBGM.html. Accessed January 17, 2018.
Healthcare Infection Control Practices Advisory Committee (HICPAC), William A. Rutala, Ph.D., M.P.H.,
3
and David J. Weber, M.D., M.P.H. Centers for Disease Control and Prevention, 2008. "Guideline for
Disinfection and Sterilization in Healthcare Facilities." Atlanta.
https://www.cdc.gov/infectioncontrol/pdf/guidelines/disinfection-guidelines.pdf. Accessed Jan 17, 2018.
1080_Guide Me_MANUAL_MASTER.indb 61
Technical Information
3/5/2018 1:28:06 PM
9
61
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Guide Me and is the answer not in the manual?
Questions and answers
I have replaced batteries according to the instructions, have checked and recked batteries are in correct positions, now, nothing comes up on screen
The Accu-Chek Guide Me meter may not be turning on after replacing the batteries due to the following reasons:
1. Incorrect Battery Installation – Ensure that both CR2032 lithium batteries are inserted with the positive side facing up and properly positioned under the black tabs.
2. Loose Battery Door – The battery door must be securely snapped in place to hold the batteries correctly.
3. Old or Faulty Batteries – Make sure both batteries are new, from the same brand, and properly charged.
4. Damaged Battery Contacts – Check for any dirt or damage on the battery contacts inside the meter.
5. Meter Malfunction – If the issue persists, the meter may need to be reset or checked by customer support.
Try reinstalling the batteries correctly and ensuring the battery door is secure. If the problem continues, consider replacing the batteries again or contacting Accu-Chek Customer Care.
This answer is automatically generated
what is e-6
Does the Accu Chek Guide Me glucose monitor have a reminder alarm system
what is error 9
What is ERR code E-9
The E-9 error code on the Accu-Chek Guide Me may still appear after changing the batteries. If it does, remove the batteries again, press the power button for at least 2 seconds, then reinsert the batteries.
This answer is automatically generated