Preparing For A Control Test; Performing A Control Test - Accu-Chek Mobile User Manual

Preparing for a control test

For a control test, you need:
• The meter with inserted test cassette
• An unopened applicator with Accu-Chek Mobile control solution
• A clean, dry paper towel.
The solution in the applicators is intended for single use only.
Read the control solution package insert.

Performing a control test

A control test in its main steps is the same as a normal test except that you apply control solution to the
test area instead of blood.
1
Either open the tip cover or
select Test in the Main menu.
Shortly after the test area has
been advanced to the tip of the
cassette, the prompt Apply drop
appears and a beep tone sounds.
kim_manual_0640
Twist the cap off the applicator.
Checking the meter
kim_manual_0650
2
Hold the applicator at a slight
angle with the brush pointing
downwards.
Squeeze the applicator gently
until you see a small drop appear
on the brush.
9
3
95