Table of Contents
Advertisement
Chapter 1: Your New System
The Accu-Chek Guide Me Meter
Front View
1. Power/Set Button
Turns the meter on or off and sets
options.
2. Display
Shows results, messages, and test
results stored in memory.
3. Left Arrow Button
Press to enter memory, adjust settings,
and scroll through test results.
4. Right Arrow Button
Press to enter memory, adjust settings,
and scroll through averages.
1080_Guide Me_MANUAL_MASTER.indb 7
Your New System
1
2
3
4
5
Back View
5. Test Strip Slot
Insert test strip here.
6. Battery Door
Open to replace batteries.
7. Micro USB Port
Transfers data from meter to a computer (PC).
1
6
7
Side View
7
3/5/2018 1:27:41 PM
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Guide Me and is the answer not in the manual?
Questions and answers
I have replaced batteries according to the instructions, have checked and recked batteries are in correct positions, now, nothing comes up on screen
The Accu-Chek Guide Me meter may not be turning on after replacing the batteries due to the following reasons:
1. Incorrect Battery Installation – Ensure that both CR2032 lithium batteries are inserted with the positive side facing up and properly positioned under the black tabs.
2. Loose Battery Door – The battery door must be securely snapped in place to hold the batteries correctly.
3. Old or Faulty Batteries – Make sure both batteries are new, from the same brand, and properly charged.
4. Damaged Battery Contacts – Check for any dirt or damage on the battery contacts inside the meter.
5. Meter Malfunction – If the issue persists, the meter may need to be reset or checked by customer support.
Try reinstalling the batteries correctly and ensuring the battery door is secure. If the problem continues, consider replacing the batteries again or contacting Accu-Chek Customer Care.
This answer is automatically generated
what is e-6
Does the Accu Chek Guide Me glucose monitor have a reminder alarm system
what is error 9
What is ERR code E-9