Accu-Chek Mobile Getting Started Manual

C
©2010 Roche Diagnostics
ACCU-CHEK, ACCU-CHEK MOBILE and FASTCLIX
are trademarks of Roche.
Roche Diagnostics GmbH
M
Sandhofer Strasse 116
68305 Mannheim, Germany
www.accu-chek.com
Welcome to a brand new way of
blood glucose monitoring!
This Getting Started Guide assists you in using your new Accu-Chek Mobile system quickly
and easily and in experiencing a brand new way of blood glucose monitoring.
This guide provides detailed information about the following topics:
1. When your meter is new

2. Preparing the finger pricker

3. Performing a blood glucose test
4. Loading a new lancet
5. What you need to know
This guide does not replace the comprehensive Reference Manual supplied with
W
your Accu-Chek Mobile system. Please be sure to observe the safety information in
the Reference Manual.
1. When your meter is new
1.
A
Open the tip cover completely as far as
it will go. Only then will you be able to open
the cassette compartment and to insert the
test cassette.
5.
2. Preparing the finger pricker
1.
Remove the cap .
The finger pricker is intended for personal use only! It may only be used by one person for obtaining blood. There is a risk of infections being transmitted if the finger pricker is
W
used by other people, or if healthcare professionals use this finger pricker to obtain blood from more than one person. This finger pricker is therefore not suitable for professional
use in healthcare facilities or institutions.
2.
B
Push the release button B for the cassette
compartment cover downwards.
6.
2.
Insert a new lancet drum (white end
first). You now have 6 new and sterile
lancets at your disposal.
Accu-Chek
BLOOD GLUCOSE MONITORING SYSTEM
Getting Started
Guide
Start using the system and experience
a brand new way of blood glucose monitoring.
Release button for
opening the cassette compartment cover
Test cassette
with 50 tests
Tip cover
Test area at the tip of the cassette
3.
Remove a new test cassette from the pack-
aging and insert it . Close the cassette
compartment cover and the tip cover.
3.
Place the cap back on again.
Mobile
®
Multifunction button for
priming and releasing
the finger pricker
Window showing number
of available lancets
Lever for loading a new
lancet
Rotatable cap for
setting the penetration
depth
4.
E
D
Remove the protective films from the
D
display. Pull the protective strip back-
E
wards out of the meter to activate the
batteries.
4.
D
Rotate the cap of the finger pricker
D
until the desired penetration depth is level
with the indicator. Start with a medium
penetration depth such as 3.